Water damage and mold is one of the most devastating disasters that will occur to your house. From leaking roofs to rising flood water to small, persistent drips, water can cause significant, expensive injury to any building.
Fixing a plumbing problem after the water damage occurs isn't end of the story. For extensive damage, complete water damage may involve water removal, subsequently drying of the area, and disinfecting and deodorizing the area to eliminate odor and subsequent mold growth.
It's safer to be on top of potential plumbing problems, because when you observe a water problem or plumbing emergency occurs, the damage is usually extensive and costly to correct.
Be sure to make these plumbing checks at least twice a year:
First, look at home's main shutoff valve. It doesn't matter what sort of plumbing leak or disaster you may have, your primary shutoff valve is critical to stopping water flow in the source.
Examine your home and bath sinks and pipes, particularly the location where the trap meets the wall. Water leaks often occur behind a sink cabinet. In addition, the p-track often the to begin with where backed-up water will overflow. The valves and offer lines also need to be examined to make sure they may be in good working condition.
Within the bathroom, perform due diligence your toilet for signs of leaks. The wax seal underneath the toilet is most frequent area for leaks and water damage and mold. This seal can be a circular type of wax that connects and seals the toilet to the drain flange beneath. One sign of potential damage is that if the toilet wobbles. This may mean the bolts that hold the toilet towards the floor are loose or worn. This may cause the wax seal to crack or break. Water (and other material) may leak, causing discoloration to the ceiling on the ground below.
The tub and shower area is an additional area that may sustain water damage, cause structural damage and mold growth. Check the caulking round the tub, showerhead, and also the tub spout and handles. If the caulking is cracked or missing, take away the remainder using a putty knife and change it with fresh caulking.
Broken washer hoses can quickly create a great deal of flooding and damage. In the event you observe any bubbles on the hose, replace it immediately. Braided, stainless-steel hoses should be used. They are stronger and last longer than rubber hoses. The valves the hoses affix to should also be checked.
By keeping on potential problem areas, you can small leaks from being a costly disaster!