Pages home > Wear Safety Net For Cone Crusher Important Parts

Wear Safety Net For Cone Crusher Important Parts

 

Black and Red Apples on Brown Surface

sandvik cone crusher parts crusher is commonly made use of for high hardness mineral ore squashing. And also it is extensively utilized for fine or additional crushing in one squashing manufacturing line.cone crusher parts pdf Typically talking, in one large squashing line, the wear of its cone bushing is really strong and that is poor influence the entire production.

 

 

Bronze Casting Process, Bronze Casting Process Suppliers and Manufacturers at Alibaba.com - 웹Usually, the spindle shaft bearing bushing is really simple to wear, the moving has mild deterioration, and also the center of it always has no wear. so just how to prevent it to use is very crucial:

 

1. According to the direction, to adjust the space of eccentric shaft bearing, when to check as well as upkeep, you can make bottom gap of cone bushing larger, at the exact same time guarantee the leading space.
2. When do the upkeep, you ought to make certain the thickness of up, center, down the same.
Adjust the bevel gear clearance to make certain the uniform of gasket.
3. Before beginning the equipment, to guarantee the tailoring wheel flexibility, and after the equipment working typically, after that feed right into the smashed materials.
4. Before quit the machine, need to let the maker discharge all the materials from crushing chamber, and after that switch off the power.
5. Take notice of the bearing's temperature, and also make sure the bearing in the great lubrication condition. As well as likewise must pay attention to the noisy and vibration. Stop the maker in time and check if there is anything stuck in the device or there is any part damaged if there is something unmoral.
6. Maintain feeding evenly; restrict the metal, wood and also various other solid products into the crushing chamber.
7. If the final result size is a lot bigger than needed, you need to find out the factor, and also remove this sensation.cone crusher parts pdf
8. When stop the crusher, you should examine whether the screw hangs, the wearing parts' damageable level. And also replace the putting on parts in time and more.

Last updated 46 days ago by Marie